Top Technical Manual DTD constructs consist of the following DTDs:
TECHNICAL MANUAL ASSEMBLY INFORMATION CHAPTER (PRODUCTION)
This abstract is for: DTD %production; "-//USA-DOD//DTD MIL-STD-2361 TM Assembly Chapter REV 1.1 20000515//EN". The DTD describes the SGML structure and content tagging conventions for General Preparation and Assembly Information chapter found in MIL-STD-2361A and MIL-STD-40051. The following paragraph(s) describe the requirements for the assembly of a complete manual.
This specificationincludes instructions for the development of front and back matter and TM assembly information for each level of maintenance and combinations thereof.For example, TM assembly instructions are given for an operator's manual (-10),a combined operator's/unit maintenance manual (-12), a unit maintenance manual(-20), a combined unit/direct support maintenance manual (-23), etc.
To assemble a complete manual with all of its required parts of the applicable TM (i.e., introductory information, maintenance, troubleshooting, etc.), refer to MIL-STD-2361A and TM Requirements Matrix in MIL-STD-40051 for appropriate volume configurations.
Distribution Statement A: Approved for public release, distribution is unlimited.
INTRODUCTORY INFORMATION WITH THEORY OF OPERATION INFORMATION CHAPTER (GIM)
This abstract is for: DTD %gim; -//USA-DOD//DTD MIL-STD-2361 TM Theory Chapter REV 1.1 20000515//EN. The DTD describes the SGML structure and content tagging conventions for Introductory Information with Theory of Operation Information chapter found in MIL-STD-2361A and MIL-STD-40051A. The following paragraph(s) describe the requirements for the general information portion of a manual.
This specification establishes the technical content requirements for the preparation of introductory information with theory of operation for Technical Manuals (TM), revisions, supplements, and changes. Requirements for functional and physical descriptions of the major equipment, components, and applicable interface equipment are provided. Manuals covered by this specification include maintenance manuals (all levels), Preventive Maintenance Services (PMS), and Phased Maintenance Inspection (PMI), and maintenance Test Flights (MTF).
To assemble introductory information with theory of operation with the other required parts of the applicable TM (i.e., operator instructions, troubleshooting, etc.), refer to MIL-STD-2361A, public identifier entity "-//USA-DOD//DTD MIL-STD-2361 TM Assembly REV 1.1 20000515//EN", and TM Requirements Matrix in MIL-STD-40051A for appropriate volume configurations.
Distribution Statement A: Approved for public release, distribution is unlimited.
OPERATOR'S INFORMATION CHAPTER (OPIM)
This abstract is for: DTD %opim; "-//USA-DOD//DTD MIL-STD-2361 TM Theory Chapter REV 1.1 20000515//EN". The DTD describes the SGML structure and content tagging conventions for Operators Instruction Information chapter found in MIL-STD-2361A and MIL-STD-40051A. The following paragraph(s) describe the requirements for the operator instructions portion of a manual.
This specification establishes the technical content requirements for the preparation of operator instructions for Technical Manuals (TMs), revisions, supplements, and changes. Requirements describe the safe and efficient operation of the weapon system/equipment authorized for the operator/crew. Manuals covered by this specification include maintenance manuals (all levels) and Maintenance Test Flights (MTF).
This specification does not cover requirements for the operation of aircraft. To assemble operator instructions with other required parts of the applicable TM (i.e., introductory information, troubleshooting, etc.) refer to MIL-STD-2361A, public entity "-//USA-DOD//DTD MIL-STD-2361 TM Assembly Chapter REV 1.1 20000515//EN", and TM Requirements Matrix in MIL-STD-40051A for appropriate volume configurations.
Distribution Statement A: Approved for public release, distribution is unlimited.
TROUBLESHOOTING PROCEDURES INFORMATION CHAPTER (TIM)
This abstract is for: DTD %tim; "-//USA-DOD//DTD MIL-STD-2361 TM Troubleshooting Chapter REV 1.1 20000515//EN". The DTD describes the SGML structure and content tagging conventions for Troubleshooting Procedures Information chapter found in MIL-STD-2361A and MIL-STD-40051A. The following paragraph(s) describe the requirements for the troubleshooting portion of a manual.
This specification establishes the technical content requirements for the preparation of troubleshooting procedures Technical Manuals (TMs), revisions, supplements, and changes. Requirements for preparing all information needed by user personnel for performing all required troubleshooting through all applicable levels of maintenance are covered. Troubleshooting procedures that require a minimum of time are prepared for equipment, systems, and weapon systems prescribed by the Logistics Support Analysis (LSA)/Maintenance Allocation Chart (MAC). Troubleshooting procedures contain information to help the operator/technician recognize, find the cause, and correct the trouble in the equipment and auxiliary equipment.
To assemble troubleshooting procedures with other required parts of the applicable TM (i.e., introductory information, maintenance, etc.) refer to MIL-STD-2361A, public identifier entity "-//USA-DOD//DTD MIL-STD- 2361 TM Assembly Chapter REV 1.1 20000515//EN", and TM Requirements Matrix in MIL-STD-40051A for appropriate volume configurations.
Distribution Statement A: Approved for public release, distribution is unlimited.
MAINTENANCE INSTRUCTIONS INFORMATION CHAPTER (MIM)
This abstract is for: DTD %mim; "-//USA-DOD//DTD MIL-STD-2361 TM Maintenance Chapter REV 1.1 20000515//EN". The DTD describes the SGML structure and content tagging conventions for Maintenance Instructions Information chapter found in MIL-STD-2361A and MIL-STD-40051A. The following paragraph(s) describe the requirements for the maintenance instructions portion of a manual.
This specification establishes the technical content requirements for the preparation of maintenance instructions for Technical Manuals (TMs), revisions, supplements, and changes. Requirements are provided for all information needed by user personnel for performing all required operator (-10), unit (-20), Aviation Unit Maintenance (AVUM), Direct Support (DS) (-30), Aviation Intermediate Maintenance (AVIM), General Support (GS) (40), and/or depot level (overhaul) maintenance on equipment, systems, and weapon systems (including ammunition and auxiliary equipment) prescribed by the Logistics Support Analysis (LSA)/Maintenance Allocation Chart (MAC) and the Source, Maintenance, and Recoverability (SMR) codes. Maintenance instructions that enable the user of this portion of the manual to receive, process, clean, service, operate, test, repair, inspect, and return to an acceptable performance standard all components of the equipment in a minimum of time with the skills, tools, test equipment, and spare parts authorized by the LSA/MAC are covered. Manuals covered by this specification include maintenance manuals (all levels), Maintenance Test Flight (MTF), Preventive Maintenance Services (PMS), and Phased Maintenance Inspection (PMI).
To assemble maintenance instructions with the other required parts of the applicable TM (i.e., operator instructions, troubleshooting, etc.), refer to MIL-STD-2361A, public identifier entity "-//USA-DOD//DTD MIL-STD-2361 TM Assembly Chapter REV 1.1 20000515//EN", and TM Requirements Matrix in MIL-STD-40051A for appropriate volume configurations.
Distribution Statement A: Approved for public release, distribution is unlimited.
REPAIR PARTS AND SPECIAL TOOL LISTS (RPSTL) INFORMATION CHAPTER (PIM)
This abstract is for: DTD %pim; "-//USA-DOD//DTD MIL-STD-2361 TM Parts Chapter REV 1.1 20000515//EN". The DTD describes the SGML structure and content tagging conventions for Repair Parts and Special Tool Lists (RPSTL) Information chapter found in MIL-STD-2361A and MIL-STD-40051A. The following paragraph(s) describe the requirements for the repair parts and special tools manual.
This specification establishes the technical content requirements for the preparation of Repair Parts and Special Tools Lists (RPSTLs) Technical Manuals (TMs), revisions, supplements, and changes. Requirements cover the repair parts list, special tools list, part number index, and reference designator index.
To assemble repair parts and special tools information with the other required parts of the applicable TM (i.e., introductory information, etc.), refer to MIL-STD-2361A, public identifier entity "-//USA-DOD/ /DTD MIL-STD-2361 TM Assembly Chapter REV 1.1 20000515//EN", and TM Requirements Matrix in MIL-STD-40051A for appropriate volume configurations.
Distribution Statement A: Approved for public release, distribution is unlimited.
SUPPORTING INFORMATION CHAPTER (SIM)
This abstract is for: DTD %sim; "-//USA-DOD//DTD MIL-STD-2361 TM Support Chapter REV 1.1 20000515//EN". The DTD describes the SGML structure and content tagging conventions for Supporting Information chapter found in MIL-STD-2361A and MIL-STD-40051A. The following paragraph(s) describe the requirements for the supporting information (appendix) portion of a manual.
This specification establishes the technical content requirements for the preparation of supporting information (appendixes) for Technical Manuals (TMs), revisions, supplements, and changes. Requirements cover references, Maintenance Allocation Chart (MAC), Repair Parts and Special Tools List (RPSTL), Components of End Item (COEI) and Basic Issue Items (BII), Additional Authorization List (AAL), expendable and durable items, tool identification list, mandatory replacement parts, heat shrink film protective covering, quarantine inspection/ customs clearance, abbreviation lists, and any other supporting information required for the system/equipment.
To assemble supporting (appendix) information with the other required parts of the applicable TM (i.e., introductory information, maintenance, troubleshooting, etc.), refer to MIL-STD-2361A, public identifier entity "-//USA-DOD//DTD MIL-STD-2361 TM Assembly Chapter REV 1.1 20000515//EN", and TM Requirements Matrix in MIL-STD-40051A for appropriate volume configurations.
Distribution Statement A: Approved for public release, distribution is unlimited.
AIRCRAFT OPERATORS INSTRUCTIONS AND CHECKLISTS INFORMATION CHAPTER (PILOT-OPIM)
This abstract is for: DTD %pop; "-//USA-DOD//DTD MIL-STD-2361 TM Pilot Operator Chapter REV 1.1 20000515//EN". The DTD describes the SGML structure and content tagging conventions for Supporting Information chapter found in this standard and MIL-M-63029C (AV) (the MIL-SPEC is cited for guidance). The following paragraph(s) describe the requirements for the aircraft operator instructions manual.
This specification establishes the technical content requirements for the preparation of aircraft operator instructions and checklists for Technical Manuals (TMs), revisions, supplements, and changes. Requirements describe the safe and efficient operation of the aircraft by authorized personnel. Instructions and checklists include identification of specific crew members and their assigned tasks. This specification only covers the requirements for the operation of aircraft.
To assemble aircraft operator instructions with other required parts of the applicable TM (i.e., supporting information, etc.) refer to MIL-STD-2361A for public identifier entity "-//USA-DOD//DTD MIL-STD-2361 TM Assembly Chapter REV 1.1 20000515//EN".
DistributionStatement A: Approved for public release, distribution is unlimited.
PREPARATION OF AIRCRAFT FOR SHIPMENT INFORMATION CHAPTER (SHIPIM)
This abstract is for: DTD %shipim; "-//USA-DOD//DTD MIL-STD-2361 TM Shipping Chapter REV 1.1 20000515//EN". The DTD describes the SGML structure and content tagging conventions for Shipment of Aircraft Information chapter found in this standard and MIL-M-63005B (AV) (the MIL-SPEC is cited for guidance). The following paragraph(s) describe the requirements for a shipment of aircraft manual.
This specification establishes the technical content requirements for the preparation of Army aircraft shipping instructions for Technical Manuals (TMs), revisions, supplements, and changes. Requirements for preparing all information needed by user personnel for performing all required tasks involved in preparation of shipment of a single aircraft series are provided. Specific requirements and procedures relating to shipment by cargo aircraft, vessel, truck, crated shipment, containerized shipment, and external transport by helicopter are detailed. The specification also covers cleaning, disassembly, preservation, marking, preparation of shipper-prepared documents, loading, tiedown, unloading, depreservation, and reassembly procedures necessary for tactical, minimum disassembly logistical, and maximum density logistical movements.
To assemble a complete shipment of aircraft manual with its other required parts (i.e., introductory information, etc.), refer to MIL-STD-2361A for public identifier entity "-//USA-DOD//DTD MIL-STD-2361 TM Assembly Chapter REV 1.1 20000515//EN".
Distribution Statement A: Approved for public release, distribution is unlimited.
Return